Vibrant Metal And Tube
Ahmedabad, Gujarat
GST No. 24CHGPC1295L1ZB
Call 07949322160 88% Response Rate
Send Enquiry
Aluminium Products
Providing you the best range of rectangular aluminum strips, aluminum round bar, round aluminium rod, aluminium plates sheets and aluminum sheet coil with effective & timely delivery.
Rectangular Aluminum Strips
Get Best Quote
Rs 300 / KgPrice on Request
Minimum Order Quantity: 50 Kg
Product Brochure
| Thickness | 2 mm |
| Width | 25 mm (1 inch) |
| Shape | Rectangular |
| Alloy | Commercial Grade |
| Temper | T6 |
| Length | 12 ft (3.6 m) |
| Application | Electrical, Automobile |
| Finish | Mill Finish |
| Country of Origin | Made in India |
| Usage/Application | Automobile Industry |
| usage | construction |
| 1050 | S1B | 100-135 | BS1470 Sheet | 99.5% Purity, Low Strength with good formability, used in general fabrication work. |
| 1200 | S1C | 100.140 | BS1470 Sheet/Plate | 99.5% Purity, Low Strength with good formability, used in general fabrication work. Largely replaced by 1050. |
| 2011 | FC1 | 310 min | BS4300 Round Bar | Small addition of copper and lead improve strength and give excellent machineabili-ty. Not suitable for welding or anodising. |
| 2014A | H15 | 490+465 | BS1474 Bar BS1470 Sheet/Plate | Addition of 3.9-5% Cu and other elements give this alloy high strength and moderate machining properties. |
| 5083 | N8 | 275-350 | BS1470 Sheet/Plate | Addition of 4-4.9% Mg and other elements give this alloy medium strength and good general engineering properties. Suitablility for low temperature applications. Commonly used in plate form for general applications. |
| 5251 | N4 | 200-240 | BS1470 Sheet/Plate | A medium strength alloy commonly used in sheet form for general applications. Good formability and welding. |
| 6063 | H9 | 130 min | BS1474 Bar | A low alloyed medium strength alloy for general engineering applications. Commonly available in small or complex sections due to its good formability in manufacture and anodising characteristics. |
| 6082 | H30 | 290 min | BS1474 Bar BS1470 Sheet/Plate | Magnesium, Manganese, Silicon and other elements give this alloy many characteristics, high strength, good machining and good welding. The most common general engineering alloy in extruded form. |
| 6262 | None | 180 min | BS1474 Bar | A medium/high strength alloy having a combination of strength and very good machineability. Suitable for anodising. |
| 7020 | H17 | 300 min | BS4300 Round Bar | Addition of 4-5% Zn, Zi, Ti and other elements give this alloy high strength and high resistance to fatigue stress. This and other 7000 series alloys are used extensively for aerospace applications. |
View Complete details
Yes! I am Interested
Request a call back
Aluminum Round Bar
Get Best Quote
Rs 305 / KgPrice on Request
Product Brochure
| Grade | 6063 |
| Shape | Round |
| Diameter | 2 inch |
| Usage/Application | Construction |
| Length | 3 m |
| Is It Anodised | Anodised |
| Is It Recyclable | Non Recyclable |
| Material | Aluminum |
View Complete details
Yes! I am Interested
Request a call back
Round Aluminium Rod
Get Best Quote
Rs 310 / KgPrice on Request
Product Brochure
| Grade | 6082 |
| Diameter | 5MM TO 100MM |
| Length | 6 MITERE |
| Shape | Round |
| Is It Anodised | Not Anodised |
| Is It Recyclable | Recyclable |
| Country of Origin | Made in India |
| 1050 | S1B | 100-135 | BS1470 Sheet | 99.5% Purity, Low Strength with good formability, used in general fabrication work. |
| 1200 | S1C | 100.140 | BS1470 Sheet/Plate | 99.5% Purity, Low Strength with good formability, used in general fabrication work. Largely replaced by 1050. |
| 2011 | FC1 | 310 min | BS4300 Round Bar | Small addition of copper and lead improve strength and give excellent machineabili-ty. Not suitable for welding or anodising. |
| 2014A | H15 | 490+465 | BS1474 Bar BS1470 Sheet/Plate | Addition of 3.9-5% Cu and other elements give this alloy high strength and moderate machining properties. |
| 5083 | N8 | 275-350 | BS1470 Sheet/Plate | Addition of 4-4.9% Mg and other elements give this alloy medium strength and good general engineering properties. Suitablility for low temperature applications. Commonly used in plate form for general applications. |
| 5251 | N4 | 200-240 | BS1470 Sheet/Plate | A medium strength alloy commonly used in sheet form for general applications. Good formability and welding. |
| 6063 | H9 | 130 min | BS1474 Bar | A low alloyed medium strength alloy for general engineering applications. Commonly available in small or complex sections due to its good formability in manufacture and anodising characteristics. |
| 6082 | H30 | 290 min | BS1474 Bar BS1470 Sheet/Plate | Magnesium, Manganese, Silicon and other elements give this alloy many characteristics, high strength, good machining and good welding. The most common general engineering alloy in extruded form. |
| 6262 | None | 180 min | BS1474 Bar | A medium/high strength alloy having a combination of strength and very good machineability. Suitable for anodising. |
| 7020 | H17 | 300 min | BS4300 Round Bar | Addition of 4-5% Zn, Zi, Ti and other elements give this alloy high strength and high resistance to fatigue stress. This and other 7000 series alloys are used extensively for aerospace applications. |
View Complete details
Yes! I am Interested
Request a call back
Aluminium Plates Sheets
Get Best Quote
Rs 295 / KgPrice on Request
Product Brochure
| Grade | 6061 |
| Alloy Grade | 1100 |
| Thickness | 3 mm |
| Sheet Thickness | 0.50 mm |
| Size | 2 inch |
| Shape | Rectangular |
| Temper | H14 |
| Type | Plain Plate |
| Sheet Width | 1220 mm |
| Sheet Length | 2440 mm |
| Brand | Hindalco |
| Surface Finish | Mill Finish |
| Is It Anodized | Anodized |
| Country of Origin | Made in India |
| 1050 | S1B | 100-135 | BS1470 Sheet | 99.5% Purity, Low Strength with good formability, used in general fabrication work. |
| 1200 | S1C | 100.140 | BS1470 Sheet/Plate | 99.5% Purity, Low Strength with good formability, used in general fabrication work. Largely replaced by 1050. |
| 2011 | FC1 | 310 min | BS4300 Round Bar | Small addition of copper and lead improve strength and give excellent machineabili-ty. Not suitable for welding or anodising. |
| 2014A | H15 | 490+465 | BS1474 Bar BS1470 Sheet/Plate | Addition of 3.9-5% Cu and other elements give this alloy high strength and moderate machining properties. |
| 5083 | N8 | 275-350 | BS1470 Sheet/Plate | Addition of 4-4.9% Mg and other elements give this alloy medium strength and good general engineering properties. Suitablility for low temperature applications. Commonly used in plate form for general applications. |
| 5251 | N4 | 200-240 | BS1470 Sheet/Plate | A medium strength alloy commonly used in sheet form for general applications. Good formability and welding. |
| 6063 | H9 | 130 min | BS1474 Bar | A low alloyed medium strength alloy for general engineering applications. Commonly available in small or complex sections due to its good formability in manufacture and anodising characteristics. |
| 6082 | H30 | 290 min | BS1474 Bar BS1470 Sheet/Plate | Magnesium, Manganese, Silicon and other elements give this alloy many characteristics, high strength, good machining and good welding. The most common general engineering alloy in extruded form. |
| 6262 | None | 180 min | BS1474 Bar | A medium/high strength alloy having a combination of strength and very good machineability. Suitable for anodising. |
| 7020 | H17 | 300 min | BS4300 Round Bar | Addition of 4-5% Zn, Zi, Ti and other elements give this alloy high strength and high resistance to fatigue stress. This and other 7000 series alloys are used extensively for aerospace applications. |
View Complete details
Yes! I am Interested
Request a call back
Aluminum Sheet Coil
Get Best Quote
Rs 310 / KgPrice on Request
Product Brochure
| Alloy Grade | 6061 |
| Temper | T6 |
| Alloy | With Alloy |
| Manufacturing Process | Hot Rolled |
| Type | Sheet |
| Thickness | 2 mm |
| Brand | Hindalco |
| Surface Treatment | Polished |
| Material Grade | 6063 ,6082 ,7075 |
| Width | 4 feet |
| Length | 3 feet |
| Material | Aluminum |
| Country of Origin | Made in India |
|
Technique |
ROLLING |
|
|
STANDARD |
ASTM-B-209M , EN573 AND THE ALUMINIUM ASSOCIATION |
|
|
Dimensions |
Parameter |
|
|
Thickness (mm) |
||
|
Width (mm) |
||
|
Length (mm) MAX |
||
|
COIL OD |
||
|
CORE ID |
||
|
BUNDLE WEIGHT |
||
|
PACKAGE |
The coils are packed in eye-to-sky or eye-to-wall position, wrapped in HDPE and hardboard, strapped with hoop iron and placed on wooden pallets. Moisture protection is provided by silica gel packets. |
|
|
APPLICATION |
Bus cabins and bodies | Insulation | Cladding in buildings | aluminium composite panels |false ceiling | panelling (plain or colour-coated coils) | Electrical busbar ducting, flexibles, transformer strips, etc |
|
View Complete details
Yes! I am Interested
Request a call back
EXPLORE MORE CATEGORIES